All products
PE Self-Adhesive Film
Low-tack acrylic adhesive on a co-extruded LDPE carrier. Rolls out by hand, conforms to a skirting board, and leaves no residue on sealed hardwood, tile or vinyl within its service life.
Product shot on white groundRoll on white ground · 1600 × 1200 · 4:3
Typical surfaces
Sealed hardwoodCeramic tileLVT and laminateMarbleEpoxy floors
Specifications
| Thickness | 50–80 µm |
| Width | 600–1200 mm |
| Roll length | 100 / 200 m |
| Core | 76 mm |
| Printing | 3 colours |
| MOQ | 500 rolls |
Norguard
Adhesion grades
Peel measured on a stainless-steel panel at 180°, 300 mm/min, after 20 minutes dwell.
| Grade | Peel (g/25 mm) | Carrier | Recommended surface | Indoor life |
|---|---|---|---|---|
| NG-12 Ultra low | 12 – 18 | 50 µm | Lacquered hardwood, marble | 30 days |
| NG-25 Best seller | 22 – 30 | 60 µm | Ceramic tile, LVT, laminate | 60 days |
| NG-40 Medium | 35 – 48 | 70 µm | Carpet, textured concrete | 45 days |
| NG-40R Anti-slip | 35 – 48 | 80 µm | Stair treads, ramps | 45 days |
What we can change
What we can change
- Peel anywhere between 10 and 60 g/25 mm, from 2 tonnes
- Any width from 600 to 1200 mm, slit to order
- Up to 3 print colours on the film face
- Printed removal-date strip along the edge
- Blue, transparent or white as standard
Packing and loading
Packing and loading
Two rolls per shrink-wrapped bundle, 76 mm paper core. 1×40HQ holds roughly 4,800 rolls at 1200 mm × 100 m.